HYDROFLEX 120 Chamfer Tape is made of polyester mesh and TPE (thermoplastic elastomer). It is used for sealing structural (cold) joints and corners, the most critical points in wet surfaces. HYDROFLEX 120 is a waterproofing tape compatible with all liquid insulation.

Material chemical properties:	TPE (Thermoplastic Elastomer) & Polyester Mesh
Material system width:	120 mm
Service temperature:	-40 / +90
Thickness:	0.60 mm
Water pressure resistance:	1.5 bar

HYDROFLEX 150 TPE expansion joint tape is 150 mm wide. It is a highly elastic expansion joint tape used to seal expansion joint gaps, thermal expansion joints, and cracks. It is produced in 1, 1.50, and 2 mm thicknesses.

Material chemical properties	TPE (Thermoplastic elastomer)
Color:	Gray
Hardness (Shore):	80
Service temperature:	-40 / +90
Thermal welding temperature:	270
Elongation at break:	600%
Tear strength:	>600 N/cm
Water pressure resistance:	>8 bar
Tensile resistance:	>6 Mpa
UV resistance:	>7500 h
Bitumen resistance:	Good
Sulfuric acid resistance:	Good
Alcohol Resistance:	Good
Detergent resistance:	Good

This is a TPE-based insulation tape that expands upon contact with water and provides waterproofing of reinforced concrete joints. It is used in foundation-curtain wall joints, drinking water tanks, and swimming pools. Dimensions: 5mm x 20mm Packaging: 20 m/box

Type	Width (cm)	Wall Thickness (mm)
A 24-4	24	4

These are waterstop gaskets placed inside concrete structural elements and used in raft-to-raft, raft-to-wall, and curtain-to-wall joints with no expansion gap in the middle. They are produced in three different widths (240, 320, 500 mm). They are named A240, A320, and A500.